loader image

Our Location

8286 E 41st St Tulsa, OK 74145

Call Us


The Step-By-Step Method for Replacing a Car Windshield

A windshield with chips or cracks poses a serious safety risk on the road and should be repaired or replaced immediately. You can have a professional replace your windshield, but you can also do it yourself. The following is an in-depth guide that will walk you through each stage of replacing the windshield in your car.

Materials Needed:

  • Replacement windshield
  • Windshield adhesive
  • Windshield installation kit
  • Gloves
  • Safety glasses
  • Razor blade
  • Tape measure
  • Masking tape
  • Screwdriver set
  • Socket wrench set

Step 1: Remove the Old Windshield

To get started, park your vehicle someplace that is both safe and secure. After that, remove any stickers or decals from the windshield by scraping them off with a razor blade. After that, take a set of socket wrenches and remove the windshield wipers as well as the screws that are securing the windshield in place. Take out the old windshield from the vehicle with caution, making sure that none of the surrounding components are damaged in the process.

Step 2: Clean the Windshield Area

Utilizing a measuring tape, you can get an idea of how big your windshield has to be. To properly clean the area, apply some rubbing alcohol to a towel and then use the cloth to wipe it down. Before installing the new windshield, thoroughly clean the surrounding region to eliminate any potential issues.

Step 3: Install the New Windshield

With the use of a windshield installation kit, spread a very thin layer of windshield glue along the perimeter of the region containing the windshield. After that, gently position the new one onto the adhesive, making sure it is centered and leveled throughout the process. While the adhesive is drying, use masking tape to hold the windshield in place where it was placed.

Step 4: Reinstall the Windshield Wipers

After the adhesive has had sufficient time to dry, the windshield wipers and the screws that are securing it in place should be reinstalled. It is imperative that the screws be correctly tightened in order to guarantee that the windshield will remain in a stable position.

Step 5: Allow the Adhesive to Dry

Before you start driving the car, it is essential to give the glue sufficient time to dry thoroughly. Depending on the type of adhesive that was utilized, this could take anywhere from a few hours to an entire day to complete. Check the directions that come with the glue to see how long you should wait.

Step 6: Clean the Windshield

After the adhesive has had enough time to dry, clean the new windshield with a towel and a glass cleaner. Make sure that all fingerprints or smudges on the glass are removed.

Tips and Warnings:

  • Wear gloves and safety glasses when working with the windshield to avoid injury.
  • Make sure to use the correct type of adhesive for your car’s windshield.
  • If you’re not comfortable replacing the windshield yourself, it’s always best to take your car to a professional to have the work done.
  • Always follow the manufacturer’s instructions when using windshield adhesive.
  • Never drive the car until the adhesive has completely dried.


Replacing a car’s windshield is a task that can be done at home with the right tools and materials. By following these step-by-step instructions, you can replace your car’s windshield safely and effectively. Just remember to take your time and follow the instructions carefully to ensure a successful installation.

If you are looking for a company that specializes in windshield replacement in Tulsa, OK, look no further than our expertise here at Best Choice Auto Glass. We set the standard for auto glass services in northeast Oklahoma. We handle the full spectrum of auto glass needs with a wide range of vehicles. Call us today and let us provide you with a windshield that will perfectly fit your car!

Tulsa’s #1 Auto Glass Installation & Repair Company